We offer a wide range of Solar Street Light Poles that are fabricated as per IS: 2713, 1980 and 1161 specifications. We use seamless or welded tubes of suitable lengths to join together. Welded pipes are longitudinally welded and have only one weld seam as per the ISI standards. The longitudinal welds are staggered at each swaged joint. With a rotary or longitudinal die swaging process a circumferential weld is deposited at the upper end of the joint at a slope of approximately 45o. The circumferential weld of the Solar Street Light Poles will be deposited only after the poles are subjected to and conform to all the test requirements specified in this standard.