We provide high quality Electric Transmission Poles in the market. The Electric Transmission Poles made accessible by us are fabricated as per IS: 2713, 1980, 1161 specifications. The Electric Transmission Poles are made of seamless or welded tubes of suitable lengths swaged and joined together. The raw material used is the welded pipes which are longitudinally welded with only one weld seam. The longitudinal welds are staggered at each swaged joint. Swaging is done by special process like rotary or longitudinal die swaging process a circumferential weld shall be deposited at the upper end of the joint at a slope of approximately 45Â°. The circumferential weld is deposited after the poles are subjected to all the test requirements.